The automation trend is the convergence of the communication of the most varied types of equipment, until now connected by RS-485 to computer infrastructures, that is, to TCP/IP networks. 

In this direction, we offer the best solution so that your devices, which only communicate over serial, can integrate into Ethernet networks and get the best out of them, without complication. 

With our Converters it is easy to transmit data between the serial and Ethernet interfaces, making your equipment visible from anywhere in the network, and if you configure it, also from the Internet. 

The product kit is included: 

– 1 RS485 SERIAL ETHERNET CONVERTER 

– 1 SUPPORT FOR DIN RAIL WITH DOUBLE-SIDED ADHESIVE 

– 1 POWER SUPPLY 12V / 1A INPUT 100-240VAC – P4 CONNECTOR – 1 ADAPTER BOARD DB9 – KRE

• Communication Protocol:

  RS-485

• Flow Control:

  Hardware (RTS/CTS), Software (Xon/Xoff), None

• Connector:

  DB-9 Male or KRE (see Part Number)

• Baud Rate:

  De 300 to 115.200 bps

• Data Bits:

  7 e 8 bits

• Parity :

  Even, Odd, No Parity

• Stop Bits:

  1 e 2 Stop Bits

• IP Address:

  Static, Dynamic

• Number of Socket Connections:

  4 Concurrent Connections

• Broadcast:

  Configurable in the settings page. If enabled all active Socket Connections receive the information coming from serial.

• MODBUS:

  Configurable in the settings page. If enabled converts MODBUS RTU protocol to MODBUS TCP.

• Speed range:

  10 Mbps

• Humidity:

  5 ~ 95%

• Operating Temperature:

  -20 ~ 70 ºC